Submitted by Jay Personette -
8/2/2023
The slotted 3/8 in. hex-head front roller adjustment bolts, as depicted in the Frigidaire Use and Care Manual, pg. 8, Fig. 2, are absent from this refrigerator. The front rollers cannot be raised or lowered. The only thing at the intended locale for the front roller adjustment bolts, is a cut-out and a blank section of sheet metal.The front cabinet is so low to the floor that the secondary leveling screws, as depicted on pg. 8, Fig. 3 of the Frigidaire Use and Care Manual, are inaccessible.There is no way to level or raise the front cabinet to allow the sides to tilt the specified 1/4 in. to 1/2 in. from front to back, that would allow the doors to close freely when opened halfway. Moreover, the refrigerator doors cannot be aligned with each other and cannot be leveled. As a consequence, the top seal run on the freezer door seems to be leaking, because there is a presence of frozen condensation on the upper interior side of the freezer door.All of this is an obvious flaw in materials and workmanship, and this should be covered by the Frigidaire Warranty.This refrigerator came with a new Solitaire mobile home, the purchase of which closed on 04 August 22. We, however, have only moved into this new mobile home since 05 July 23, while this refrigerator was registered with Frigidaire on 10 July 23.Notwithstanding, choose either start date and this Frigidaire refrigerator is/was still under Warranty.I made the call to Frigidaire and got set-up for a Frigidaire/Electrolux technician to appear at our home on 26 July 23, but this technician telephoned us beforehand on that very day and declined to come out, offering-up a rational that our warranty was between Frigidaire and Solitaire Mobile homes. Not so, because Solitaire Mobile Homes is telling us just the opposite and we should contact Frigidaire. So, I have a defective Frigidaire refrigerator that is still under warranty, and I get help from neither Frigidaire nor Solitaire,
Originally posted on frigidaire.com
No, I do not recommend this product
|